1 TODO/bugs in Irssi SILC client
2 ==============================
4 o /cumode for unknown nick does not give any error message (Fix this to
8 TODO/bugs In SILC Client Library
9 ================================
11 o The PRIVATE_MESSAGE_KEY packet is not handled (it is implemented
12 though). This should be added and perhaps new client operation
13 should be added to notify application that it was received and
14 set the key only if application wishes to set (accept the key) it
17 o Additions to do after protocol version 1.1:
19 o Fix the NICK_CHANGE notify handling not to create new entry
20 for the changed client, but take the nickname from the notify
21 (removes need for resolving as well). Protocol TODO entry 3.
23 o Add support for list of errors in command replies. Protocol
27 TODO/bugs In SILC Server
28 ========================
30 o Configuration file additions (Do this to 0.8.x):
32 o Add incoming connection frequency, incoming connection frequency
33 for single IP address, key exchange frequency, key exchange
34 frequency for single IP. Add also frequency base.
36 o Add rehashing support.
38 o If server send CUMODE_CHANGE notify (like setting founder) to router
39 and router does not have founder on channel (founder is left or there's
40 no founder on channel at all), the router will accept the server's
41 founder mode change, even though it perhaps should not do that (Fix
44 o The router should check for validity of received notify packets from
45 routers (fix this to 0.9). Following NOTIFYs needs to be verified:
47 o JOIN (check that joining is allowed)
48 o SIGNOFF (maybe should check that notifier owns the client)
49 o KILLED (check that killling is allowed (Protocol TODO #13))
51 o Backup router related issues (Fix this to 1.0):
53 o Channel user mode changes are notified unnecessarely when
54 switching to backup router on router crash.
56 o Add a timeout to handling incoming JOIN commands. It should be
57 enforced that JOIN command is executed only once in a second or two
58 seconds. Now it is possible to accept n incoming JOIN commands
59 and process them without any timeouts. THis must be employed because
60 each JOIN command will create and distribute the new channel key
61 to everybody on the channel (Fix this to 1.0).
63 o Lots of statistics updating is missing around the server.
65 o If client's public key is saved in the server (and doing public key
66 authentication) then the hostname and the username information could
67 be taken from the public key. Should be a configuration option!
70 TODO/bugs In SILC Libraries
71 ===========================
73 o WIN32 silc_net_create_connection_async does not work the same way
74 than on Unix. Do it with threads on WIN32. The function works but
75 is not actually async currently (Fix this to 1.0).
78 TODO in Toolkit Documentation
79 =============================
81 Stuff that needs to be done in order to complete the Tooolkit Reference
84 o ROBOdoc documenting missing from lib/silcutil/silcbuffer.h.
86 o ROBOdoc documenting missing from lib/silcutil/silcdlist.h.
88 o ROBOdoc documenting missing from lib/silcutil/silcfileutil.h.
90 o ROBOdoc documenting missing from lib/silcutil/silcutil.h.
92 o ROBOdoc documenting missing from lib/silccrypt/silchash.h.
94 o ROBOdoc documenting missing from lib/silccrypt/silccipher.h.
96 o ROBOdoc documenting missing from lib/silccrypt/silcpkcs.h.
98 o Write "Programming with Toolkit" document, describing how to build
99 Toolkit, how the build system works, where is everything, how
100 new (external) projects can be glued into Toolkit (use irssi as an
101 example), and how external projects can use Toolkit without gluing into
102 it (how to link etc), debugging, architecture, types, etc.
104 o Write "Platform Implementations" document to describe what platforms
105 Toolkit support, what has been implemented, what has not been, what
106 works differently etc.
109 TODO in SILC Protocol
110 =====================
112 Current protocol version is 1.0. However, it is far from being perfect,
113 and needs to include additional features. Following protocol TODO entries
114 describe new stuff to be added to protocol versions 1.x.
116 1. Re-define the Status Payload: it is now 16 bits, split it into two
117 8 bits fields. First field includes status types from 0 - 9 and
118 10 - n *if* it is not an list of errors. If it is list of errors then
119 the first field includes 1, 2 and/or 3, and the second field includes
120 the error status 10 - n. This way it is possible to send multiple
121 errors (list of errors) and we have a way to tell the receiver that
122 there will be other errors as well. The second field is used only
123 if there is list of errors. If normal status, or normal (single)
124 error status the second field is set to zero, and must be ignored.
125 Hence, the status works same way as now except for list of errors.
126 To be included in protocol version 1.1.
128 2. Define that WHOIS and IDENTIFY commands must send list of errors
129 if multiple Client ID (or Channel ID and Server ID for IDENTIFY) was
130 requested and was not found. Each unfound entry must cause an error
131 command reply to the sender. Also define that errors must be sent
132 *after* sending successfully found entries (this way receiver may
133 ignore them). To be included in protocol version 1.1.
135 3. Define the NICK_CHANGE notify to send the changed nickname as a new
136 third argument. This will make the NICK_CHANGE notify handling easier
137 in the receiver's end (client primarily) since it removes the
138 requirement that receiver must resolve (using IDENTIFY or WHOIS) the
139 new Client ID received in the notify (because of the new nickname is
140 unknown). To be included in protocol version 1.1.
142 4. Add "request parameters" or similar to the WHOIS command, which can
143 be used to request various parameters (something not returned by
144 standard WHOIS command) about clients (info that could be fetched
145 even from clients). Additional specification (or appendix) should
146 be done to define the payload and the parameters. It could be used
147 to make the WHOIS command support various search conditions as well.
148 This would be the way to extend the WHOIS command to support various
149 new features without always making the command incompatible to previous
150 version. To be included in protocol version 1.1.
152 5. Inviting and banning by public key should be made possible. To be
153 included in protocol version 1.x.
155 6. Add perhaps SILENCE_USERS, SILENCE_OPERS channel user modes which
156 can be used to silence (moderate) normal users and opers (this set
157 only by founder). To be included in protocol version 1.1.
159 7. Channel Message Payload needs slight redesining to include the IV
160 field to the MAC generation of the payload. It is authenticated
161 by the packet's MAC but not by the payload's MAC. Since the IV
162 belongs to the payload, its integrity should be protected by the
163 payload MAC and not alone by packet MAC. To be included in protocol
166 8. Remove the administrative commands from the protocol all together.
167 It does not make sense for the protocol to define how a server is
168 reconnected or shutdown, since they are implementation and
169 configuration issues. Besides protocol provides only limited set of
170 administrative commands and cannot define all that one could imagine.
171 To be included in protocol version 1.1.
173 9. Add SILC_MESAGE_FLAG_REPLY for being other side to the
174 SILC_MESSAGE_FLAG_REQUEST. Add generic SILC_MESSAGE_FLAG_DATA, which
175 can include generic payload, which can include generic data. The
176 payload definition is left out for now. To be included in protocol
179 10. Check command reply error status types in various commands,
180 specifically NO_FOPRIV is missing from many commands. To be
181 included in protocol version 1.1.
183 11. Change the wording in Private Message Key Payload definition to
184 describe the problems of trusting the payload, and to indicate that
185 the receiver may not accept the key in the payload, and to describe
186 other means of distributing a key.
188 13. Add the killer's client ID to the KILLED notify. To be included in
189 protocol version 1.1.
191 14. The length of Arguments Num field in Notify Payload and Command
192 Payload enforces that total of 256 arguments can be associated
193 to a such payload. However, command-xx draft specified much higher
194 values, and these should be fixed.